ELSA 3D REVELATOR, Быстрый запуск

Страница: 5 / 5

T
HE
3D REVELATOR S
UITE
After the installation you will find a new symbol in the task bar of Windows. Behind this symbol there is the
3D REVELATOR Suite , which you can open with one mouse-click. All the important functions are deposited
here centrally and can be easily adjusted.
With the driver switch function of the 3D REVELATOR Suite you can switch between the original
drivers and tools for the installed graphics card, and the 3D REVELATOR drivers. After switching
Windows must be started again.
F
OR CORDLESS USERS ONLY
:
Just above the nose pads of the infrared model, you'll find a cover plate for the
battery compartment of the
3D REVELATOR . Two CR2032 batteries will be
required if you ever need to replace them. Please note that when inserting that
the plus pole of the battery must point to the cover plate.
Remember: be sure to dispose of the old batteries correctly. Batteries do not
belong in your regular household trash.
When taking the infrared version of the 3D REVELATOR off briefly or
setting it aside for longer periods of time, don't forget to fold up at
least the right-hand earpiece. The on/off switch of the glasses is lin-
ked to the hinge mechanism. The glasses are ready to receive in their
open state and are thus drawing power from the batteries.
O
PERATING
N
OTICE
You think everything should be working by now, but you are having problems? The causes arise mostly from
the system environment or even from certain input devices. For example, connect the glasses before starting
the operating system and make sure that the power-saving mode for your monitor is switched off. Also make
sure that the vertical synchronization (V-sync) for your graphics board is activated.
With the infrared version of the 3D REVELATOR, interference can be created by the special wave
characteristic of fluorescent tubes and the Infrared transfer can be disturbed. In such case you
should alter the lighting environment.
You can find responses to most questions in the FAQs on the 3D REVELATOR CD. Just start the Setup pro-
gram, click on the button Support and choose FAQs .
Or visit ELSA on the Internet at www.elsa.com. Our Support pages has an area where frequently asked que-
stions (FAQs) are coverd in detail and many useful tips can be found.
H
OW TO CONTACT
ELSA
Support-Hotline +44-171294 0114
Internet www.3drevelator.com/support
7 8
21626.fm Seite 4 Dienstag, 10. August 1999 11:03 11