ELSA 3D REVELATOR, Быстрый запуск

Страница: 4 / 5

is capable of displaying. Perform this step for every resolution that you would like to use later with Direct3D.
Windows will retain these settings.
WIN95:
Settings
Control Panel Display Settings Details
WIN98:
Settings
Control Panel Display Settings Advanced... Settings Details
Enabling the stereo driver
Next, activate the stereo driver. You can then
enable and disable the driver with the '–' hotkey on the
numeric keypad.
WIN9x:
Settings
Control Panel Display Stereo
Game start!
Put on the glasses! Go for it!
Some games must first be switched to Direct3D. You can check this in the Options of the game.
S
EEING CORRECTLY
The Windows help file under ' Stereo' covers the possible settings in detail, so let's concentrate on the
in-game control panel. As soon as you've activated the stereo effect and started a game, you can call up the
in-game control panel with the * key on the numeric keypad.
Note: The function keys of the game are disabled as long as the in-game control panel is active.
As a general rule, don't hesitate to experiment with the settings! Check the values in the stereo-width cal-
culator and adapt them as required. Manipulate the values using the function keys in the control panel and
observe the effects.
3
4
!
Reduce the minimum Z value
/
Reduce the stereo width
"
Increase the minimum Z value
(
Increase the stereo width
§
Reduce the maximum Z value
)
Enable and disable Dyna-Z TM
$
Increase the maximum Z value
=
Save the current settings for the game
%
Move scene out from the monitor
?
Reduce nonlinear Z-mapping factor
&
Move scene in towards the monitor
J
Increase nonlinear Z-mapping factor
The control panel histogram illustrates the distri-
bution of Z values in the scene. The relative posi-
tion of the monitor and viewing plane are also
symbolized.
5 6
21626.fm Seite 3 Dienstag, 10. August 1999 11:03 11