USER MANUAL
EL SERIES
04.04.2018
10
Do not transport tools and materials unless they
are evenly distributed and can be safely
handled by person(s) in the platform.
Do not use the machine on a moving or mobile
surface or vehicle.
Be sure all tires are in good condition and castle
nuts are properly tightened.
Do not use the platform controls to free a
platform that is caught, snagged or otherwise
prevented from normal motion by an adjacent
structure. All personnel must be removed from
the platform before attempting to free the
platform using the ground controls.
Batteries are used as counterweight and are
critical to machine stability. Do not replace the
battery
box
without
the
manufacturer's
permission. Do not use batteries that weigh less
than the original equipment.
Do not use the machine as a crane.
Do not tie the platform to adjacent structures.
Hazards Associated
With Slopes
Do not drive the machine on a slope that
exceeds the slope and side slope rating of the
machine Slope rating applies to machines in the
stowed position.
Maximum slope rating, stowed
25% (14°)
Maximum side slope rating
stacked
15% (9°)
Note: Slope rating is subject to ground
conditions and adequate traction. See “Driving
on a Slope” in the Operating Instructions
section.
Fall Hazards
Users in the vehicle must wear
a safety belt or safety strap in
accordance with the legal
regulations. Hook the pull cord
to the bolt on the platform.
Do not sit, stand or climb on the
platform guard rails.
Maintain a firm footing on the
platform floor at all times.
Do not climb down from the platform when
raised.
Keep the platform floor clear of debris.
Attach the platform entry chain or close the
entry gate before operating.
Do not enter in or exit the platform if the
machine is in stowed position and platform is
not at ground level.
