ELRO HIS20USB Скачать руководство пользователя страница 4

Windows Vista has been designed with an additional 

protection for all files in the folder C:\Program Files and 

any attempt to overwrite any files in the folder will be 

forbidden by the OS. Consequently, this protection will 

render the application unable to apply the 

configurations that the user has made and lead to 

application error. Should your current OS have similar 

protection, be sure to disable it or seek assistance from 

your system administrator. 

 

When installation is complete, the system will create a 

shortcut icon for Home Integrated System on the 

desktop and 

               

in the Start Menu. Simply 

double click on the icon to activate the Home 

Integrated System. 

 

 

Home Integrated System 

Operating Instructions 

 

When you attempt to configure the Home Box via 

Home Integrated System, please take note of the 

following during the process: 

1. 

Do not remove the Wireless Key from 

your system while Home Integrated 

System is still running as this may 

cause the application to freeze. 

2. 

Do not configure Home Box using its 

control panel while Home Integrated 

System is still running as this may 

result in data inconsistency. 

3. 

With the exception of actions such as 

Add Device / Replace Device / 

Remove Device, in order for other 

settings to take effect, the Sync 

function must be used to apply the 

new settings to the Home Box. 

 

When you activate Home Integrated System, the 

system will automatically check to see if the Wireless 

Key has been connected to the PC. If a Wireless Key 

has been found, the system will automatically access 

relevant data from the Home Box. The process will take 

approximately two minutes; please wait for the system 

to read the data. 

 

 

Once the system has finished reading the data, the 

system will prompt the user for Admin password. 

Please note that in order to operate the system, you 

must enter the correct Admin password. The factory 

preset Admin password for Home Box is “1234”. For 

security reasons, it is recommended that once you log 

into the system, go to Settings – System – User and 

change the default Admin password. 

 

 

You will be taken to the main operating screen after the 

system has validated the password you have entered. 

 

 

The Home Integrated System is made up of five 

primary functional modules, namely: 

1.Home Page 

2.Sync 

3.Event Log 

4.Add Device 

5.Setting 

 

I. Home Page 

Содержание HIS20USB






















Отзывы: