- 5 -
8.
Sabotage protection
•
On the back is a switch that is pressed when the siren with flashing light is mounted against the
wall. If the system is switched on or in night mode, an alarm will occur immediately if someone
tries to remove it. Pairing, mounting and maintenance can only be done when the alarm is
turned off.
9.
Mounting
•
The siren and flashing light can be mounted with the supplied screws and plugs (
14
).
Remember that the location must be within the range of the ELRO HOME+ ALARM unit.
10.
Specifications
Power supply
3 alkaline batteries type AA 1.5V (included)
Wireless distance
up to 50m (without obstacles)
Standby current
≤110 uA
In operation
≤350 mA
Siren volume
90dB@30cm
Operating temperature
-10C°~50C°
Humidity
90%rh (non-condensing)
Tamper protection
Yes, in Arm/Home Arm
Housing
PC+ABS
System indication
Yes, green/blue/red
Weight
115 g (battery not included)
184 g (battery included)
Dimensions
121mm × 88mm × 40mm
