- 4 -
•
Tap the cogwheel (
5
), then wireless siren (
6
) and finally choose the siren and flashlight, in this
case the "Front Door", tap the "i" (
7
).
•
Tap "Siren settings" (
8
) to enter the menu, remember to confirm with the blue "
V
" (9) after
you have changed a setting.
•
Testing from the app is very easy, tap test (
10
) in the "Accessory Settings" menu of the siren
and flashlight "Frontdoor".
5.
Removing the siren and flashing light from the app
•
The link can be removed by sliding the "i" to the left and tapping delete (
11
). Even though the
link is broken it may take a while for the information in your app to disappear.
6.
Testing
•
Testing can be done in 2 ways, through the Accessory Settings app but also using the test
button in the battery compartment. In both cases you will hear 2 "Beep" signals, the 4 LEDs
and the status indicator will flash 1 time.
•
The test button is also used if, instead of "Scan QR Code", the "Learn Mode" option is used to
establish the link with the ELRO HOME+ ALARM unit.
7.
Resetten
•
Pressing the reset button removes the link with the ELRO HOME+ ALARM unit, the siren gives 2
beep signals, the 4 LEDs flash 1 time and the status indicator then flashes green, blue and red
indicating that the link has been removed. Turn the ON/OFF switch to OFF to save the batteries
for next use.
