Elpumps BTSZ 400, Руководство пользователя

Страница: 20 / 126

20
• Economic operation,
• Relatively low energy consumption,
• Single-phase operation,
• Minimum requirements for usage and maintenance,
• Simple opportunities to repair in a repair service network.
If you use the pump in a pool with fishes, take proper measures for the pump not to suck the fishes! Check the seals of the
pump every half-year (because of the water containing aggressive substances). Take into consideration also the maximum
particle size allowed for the pump.
Chapter 2: Application limits
WARNING! The pump is not suitable for pumping inflammable or dangerous liquids!
WARNING! Avoid dry operation of the pump strictly!
Do not use the pump in a swimming pool or garden pool, when persons or living animals are
staying in it!
For the proper operation of the pump, do not exceed the permitted size of contamination because it would hinder operation of
pump and flow of liquid. Furnished with automatic switch, the pump can be used in continuous mode without any supervision.
When the water reaches the set level, the level switch will put the device into operation. The pump of small volume and
weight ensures transportation of the liquid with economic energy consumption. Temperature of the transported liquid shall
not exceed 35°C, while the environment 40°C!
DO NOT USE
• for pumping fibre structure materials (cotton, cloth, synthetic foam) with water,
• for transporting chemical agents or substances involving risk of explosion or fire,
• for transporting foods and drinks used for human eating.
,
Chapter 3: Start-up, usage
DANGER! Risk of electric shock! Perform each operation of pump installation
only after having the mains cable disconnected!
DANGER! In order to avoid serious injury to person, it is strictly forbidden to
inspect the suction orifice by hand while the pump is connected to the mains.
VESDANGER! Risk of electric shock! The person responsible for the installation
should ascertain of whether the electrical network is equipped with efficient
earthing cable in accordance with the current norms!
The pumps are single-phase devices, equipped with 2+earthed wall plug at the end of the
mains connection cables; in this case the earthing is achieved when the plug is connected to
the socket.
GB