Elprotronic FlashPro-CC, Руководство пользователя

Страница: 18 / 88

Remote Control Programming User’s Guide PM024A02 Rev.2 18
; syntax: *
; FPA-x Serial Number *
; where FPA-x can be FPA-1, FPA-2, FPA-3 .... up to FPA-8 *
; Serial number - get serial number from the desires FPA's label *
; Minimum one FPA's must be specified *
; FPA-x order - any *
; *
; e.g (without semicolon - comment) *
; *
;FPA-1 20050116 *
;FPA-3 20050199 *
;FPA-5 20050198 *
;===================================================================
FPA-1 20070031
FPA-2 20070032
Note, that only lines without comments (without semicolon on the front ) are used by
software. All lines with comment are ignored. The FPA’s serial numbers and FPA’s indexes can
be listed in any order and with gap like FPA-1, FPA-5 etc. without FPA-2, 3 etc. Minimum one
valid FPA with correct SN must be specified. Up to eight FPAs can be declared. When the FPA’s
configuration file is created then file should be saved using name starting from FPA and with
extention
ini
e.g
FPAs-setup.ini
.
Connect all required FPA’s to USB connectors and run the FlashProCC-
DLL-Demo-Cpp.exe demo software. First the DLL instances should be opened and all
connected FPA’s should be assigned to desired FPA’s indexes. It is recommended to press the
button ‘FPA assigment’ located inside the frame named ‘From File (recommended)’. When this
button is pressed, then the DLL function named
F_OpenInstancesAndFPAs( FileName )
;
is called. The list of defined FPA’s serial numbers are taken from the FPAs configuration file and
assigned all FPAs to desired FPA indexes (1 to 8). Number of instances to be opened is
calculated automatically, one per available and valid FPA. On described example with two FPAs
in the
‘FPAs selector’
will display two valid FPAs with list of used FPAs’ serial numbers. All,
others FPA-x fields will be disabled. In this example only two DLL instances becomes opened.
Valid FPA indexes becomes 1,3 and ALL.
Note: When one or more FPA adapters are connected to PC and the “FPAs-setup.ini”
does not contain valid FPA serial numbers, then the first detected FPA (and only one)
will be activated.