background image

SDZ16

                                                              

16x16 SD & AUDIO MATRIX

   

Audio inputs and outputs are balanced. If the source to connect  at the input 
has an unbalanced output, place the hot signal at the a input of the SDZ16, 
connect the signal’s mass and the b input to the GND. 
 

Connect the balanced audio 
inputs and outputs to active 
speakers or to a stereo 
amplifier. 
 

WARNING 

If

 

 the speakers 

 

or 

 

the 

amplif

 

ier

 

have an 

unbalanced 

 

input, 

 

use 

 

the “a”

 

outputs 

 

and 

the GND leaving

  

 fre

e the

"b" output

 

In this case half of the

 

output level will be lost

. 

 

                                                                                         WARNING: 

SDZ16 saves 
internally its own 
configuration, as 
benefit for a following 
switch on, 15 
seconds after the last 
modified setting. For 
this reason any 
command sent less 
than 15 seconds 
before switching off                  

.

                                                                                         will not be saved. 

 

e)Supply power to the devices. The unit will  predispose itself: 
 
e1) as factory configuration connecting inputs and outputs having the same 
number (Input 1 to output 1, input 2 to output 2 etc...). This  is the case of the 
units first switching on. 
 
e2) as last configuration, current during the switching off. This is the regular 
case.

 

 

ELPRO Video Labs s.r.l.

 

Strada della Pronda, 45/B   10142  TORINO – ITALY            
Tel.+39 0117701583 – Fax +39 011703751                           

 

Содержание SDZ16

























Отзывы: