1
HDMI (HDBaseT) CAT5 Extender Series
Ed. 2 November 2013
ITEM NO.: HE02EI-2 HDMI & IR CAT5 Extender Over Single CAT5 Cable
The HE02EI is an HDMI (HDBaseT™) CAT5 Extender using only one cost effective CAT5e/6
cable to extend your HDTV display up to 70 meters at 1080p by CAT6 AWG24 cable.
Unidirectional IR flow is permitted
.
Features:
Extends HDMI and IR signal over one CAT5/5e/6 cable.
Uncompressed high definition video up to 1080p 60Hz 12 bits, 3D and 4Kx2K.
Built in IR control, IR signal type must be selected at both TX/RX side.
Max. Data Rate 10.2Gbps.
HDMI 1.4 and HDCP compliance.
Transmission range up to 70m by CAT6 AWG24 cable at 1080p 8 bit.
Audio support up to LPCM7.1 , Dolby TrueHD , DTS-HD MA.
Installation view:
Panel view:
HE02EIT HE02EIR
IR Switch Setting:
1. When use BD/DVD remote controller (DVD at transmitter side)
，
，
，
，
set the HE01EIR IR
switch to RX and connect the Receiver cable; set the HE01EIT IR switch to TX and
connect the Emitter cable. (IR transmission from remote to local source)
2. When use TV remote controller (TV at remote side), set the HE01EIT IR switch to RX
and connect the Receiver cable; set the HE01EIR IR switch to TX and connect the
Emitter cable. (IR transmission from local to remote destination)
Cable:
Link cable recommend use high quality Cat.5e, Cat.6, CAT6a UTP / STP or FTP cable.
