1
HDMI (HDBaseT) CAT5 Extender Series
Elpro Video Labs Ed. 1 April 2014
ITEM NO.:
EL-EX-H02N
HDMI (HDBaseT) CAT5 Extender with Ethernet/ARC/IR/RS232
The transceiver EL-EX-H02N uses HDBaseT technology to extend uncompressed high-definition
video/audio with a data transfer rate of 10.2Gbps. This product also meets all HDMI v1.4 standards
including full 3D support, HDMI Ethernet Channel, audio return channel and 4Kx2K Resolution.
Additional Ethernet ports on both the Sender and Receiver are provided to connect network devices
such as 100Base-T routers, hubs, computers and your TV. IR channel is bi-directional, therefore in the
same time you can control the destination device from the location of the source and A/V sources from
the location of the destination. HDMI, RS232, IR and Ethernet signal can be transmitted simultaneously
without affecting each other. This product offers the ideal solution for extending high-definition video
and audio over long distances.
EL-EX-H02N
HDMI (HDBaseT) CAT5 Extender with Ethernet/ARC/RS232/IR
Extends HDMI, Ethernet, ARC, RS232 and IR signal over one CAT5e/6 cable.
Uncompressed high definition video up to 1080p 60Hz 16 bits.
HDMI 1.4 with 3D, 4k x 2k support, HDCP and DVI Compliant.
Max. Data Rate- 10.2Gbps.
Audio supports up to LPCM 7.1 192KHz, Dolby TrueHD, DTS-HD MA
Transmission range up to 100 meters at 1080p resolution.
ARC or optical digital audio mode auto selection, send TV digital audio back to the amplifier.
Bi-directional IR, IR carrier support 30
÷
60khz.
Bi-Directional RS232 interface – commands and data can flow in both directions via RS232, allowing
status requests and control of the destination unit.
Support one port 10/100Mbps network, allowing to connect the network TV or devices.
Installation view:
