background image

 

DA204

                      

 

DUAL1X3 VIDEO DISTRIBUTION AMPLIFIER

 

 

1.0 OVERVIEW 

 
The DA204 is a broadcast level video distributor that permits distribution of two video 
signals towards three destinations each. The product, which consists of a plug-in, can be 
inserted in the Elpro DVR-MV/RK 19" 2RU rack. 
 

 
Like all Elpro plug-ins, the DA204 is self-powered and consists of two parts:  
 
-The actual plug-in that can be inserted in the rack from the front;  
 
-The rear box, called VRB204, that can be fastened with two screws in the rear part of the 
rack. 
 
Exploiting the construction characteristics of the DA204, it is possible to link two inputs so 
as to obtain a 1x6 distributor. The link is activated using jumpers, directly on the rear part. 
 
The video inputs of the DA204 are differential in order to guarantee immunity to induced 
common mode disturbances. The 75

 termination is activated using jumpers directly on 

the rear part. 
 
The DA204 features a compensation circuit that compensates losses of the cable that 
carries the signal to its input up to a length of 150mt. 
 
The compensation circuit is calibrated using a multi-turn trimmer accessible form the front 
panel of the unit and this operation must be carried out using the instrumentation 
described in chapter 4.0 
 
 
 
 

ELPRO Video Labs s.r.l.

 

Via della Praia, 4/A   10090 Ferriere di Buttigliera Alta (TO) ITALY 
Tel.+39 0119348778 – Fax +39 0119348779

 

 

 

Содержание DA204









Отзывы: