1000475V01E DOC_Operation Manual LIBERO Cx BLE.docx | Page 28 / 34
As part of configuring the logger using liberoCONFIG, information can be
edited in predefined fields (Info Fields).
Displaying Info Fields
is done by tapping "Info Fields" in the control panel.
On the screen of the smart device the symbol
representation of the logger is extended
downwards and the contents of the 6 info fields
are displayed.
It is possible to
create new entries in Info-Fields
by tapping "Set Info-Fields" in
the control panel.
Entry of data into the 6 item lines is completed by
"START".
The updated content of the info fields will be
exported into the PDF report and listed
accordingly.
Note: Existing entries in info lines (created during
configuration using liberoCONFIG) will be
overwritten by newly edited entries.
Last LIBERO actions
All executed operations are recorded chronologically in an event list. This
event list can be accessed via this main menu item or the icon in the upper
right corner of the screen; in addition, tapping on an entry can call up further
details about the executed operation (e.g. serial number of the logger
concerned, re-reading/forwarding of created PDF reports, etc.).
