1000475V01E DOC_Operation Manual LIBERO Cx BLE.docx | Page 26 / 34
Filtering is possible according to following criteria:
LIBERO serial number (edit or scan)
Signal strength of Bluetooth® connection
Battery level (remaining days)
Temperature value
Relative humidity value (LIBERO CH only)
Alarm mode
Alarm status
Info fields
1…6
Acceptance of the set filter criteria must be confirmed by tapping "APPLY".
Selection of loggers
The loggers shown on the display of the smart device can be selected for further operating steps by
tapping the logger display symbol.
The selection of a logger is visually recognizable by a black
border line and a black bar above the logger display symbol.
Tapping "Select all" selects all loggers displayed in the main
display. Tapping again cancels the selection.
Operating steps / Actions
Operating steps (actions) can be performed for a single logger or for all loggers.
If one or more loggers have been selected confirmation is in the information bar
of the screen.
Tapping the arrow key opens a control panel which allows for
the following actions:
Start
Stop
Alarm On
Alarm Off
PDF Report Download
Show Info Fields
Set/Add Info Fields
