Chapter Four
Configuration
man_905_2.0.doc
Page
39
Changing an existing mapping
Select the mapping to change using the mouse or arrow keys, and either press the <ENTER> key,
or click the right mouse button.
Deleting an existing mapping
Select the mapping to delete using the mouse or arrow keys, and press the <DEL> key to delete the
mapping. A message asks for confirmation to ensure mappings are not deleted accidentally.
Configuring Input/Output mapping types
On selecting an Input/Output type mapping, a dialogue box allows entry of the desired mapping.
Depending on the type of unit being configured (905-1, 905-2, or 905-3), the dialogue box will
vary.
The following is the display for configuration of Input/Output mappings on a 905-1 module. The
905-2 module has 32 different “inputs”, and the 10GenericName-3 module has only 4 “inputs”.
Item
Meaning
Input
The input to be mapped.
Output
The output (usually at a remote site) at which the signal is to appear.
Destination Address
The address of the site where the output is to appear.
Store And Forward
The addresses of any intermediate repeater units needed to reach the
destination address (entered in order of nearest to furthermost repeater).
Invert
Optional inversion of the signal (
905
-1 and
905
-3 only).
