Radio/Serial Telemetry Module
User Manual
Page
38
©
March 2000
This screen shows the system address, unit address, a summary of all of the mappings configured,
and the current file (if any) being used. To move between editing the system address, unit address,
and configuration mappings, use the <TAB> key, or use the <ALT> key in conjunction with the
highlighted letter. Alternatively, simply click on the appropriate section with the mouse.
Changing the system address and unit address
To change the system address and unit address, simply move to the appropriate box using the
<TAB> key or the <ALT> + letter keys, or mouse click, and type in a new number or use the
arrow keys to edit the old number.
Entering a new mapping
To enter a new mapping, move to the Mappings section of the screen using the <TAB>, <ALT> +
M keys or the mouse. Hit the <INS> key or double click the left mouse button to bring up a
dialogue box as shown below.
Select the desired mapping type and hit the <ENTER> key or select OK to continue.
Input/Output
Standard mapping of an input to an output at another unit.
Poll
Start-up poll of a remote unit to ensure data is up to date
Comms Fail
Set a local output on comms fail to a remote site
