Elpress KL55, Инструкция по эксплуатации

Страница: 4 / 8

4
KL55 | INSTRUCTIONS FOR USE
3. SAFETY INSTRUCTIONS
TO WORK IN SAFE CONDITIONS WITH THIS TOOLING, IT IS IMPERATIVE TO READ CAREFULLY THE
DIRECTIONS FOR USE AND TO FOLLOW THE INSTRUCTIONS IT CONTAINS. IF YOU DO NOT RESPECT
THE INFORMATION WRITTEN IN THAT INSTRUCTION MANUAL THE WARRANTY WILL BE
CANCELLED.
Do not use this tool on live cables
Warning!
In order to avoid any risk of electrical shocks, injuries and fire, please follow the enclosed safety
instructions. Read and respect these instructions before using the tool. Keep this document.
General safety instructions:
Do not use cutting head for other purposes than the work for which they have been designed.
The use of other hydraulic pumps then from Elpress may bring about considerable risks for
personal injury.
DO NOT USE THIS TOOL ON LIVE CABLES
Maintenance and storage:
Store your tools in a safe place. Unused tools must be stored in a dry, locked place, out of reach of
children. Maintain your tools carefully. Keep your tools clean to work better and more safely. Follow
indications relative to maintenance and indications concerning changing accessories. Keep handles
dry and free of oil and lubricants. Check whether the tool is damaged. Before using the tool, always
carefully check that parts are functioning perfectly. Check whether moving parts are functioning
correctly, whether they do not become stuck or if other parts are damaged. All the components
must be assembled correctly and satisfy conditions for the tool’s perfect operation. Every safety
device, every switch and every other damaged or defective part must be repaired or replaced
appropriately by Elpress serevice dept.
Caution! Ensure that you use the tool and its accessories in accordance with the safety instructions.
Also understand take account of the tool’s possibilities by paying attention to the working
conditions and the task to be undertaken. Using the tool for tasks other than those intended may
be dangerous. All repairs must be undertaken by autorised Elpress Service departments with
original spare parts; if not, the tool may pose a danger for the user.
Safety instructions for the user:
Keep children away. Do not allow other people to touch the tool; keep them away from your
working area. Wear appropriate working clothes. Do not wear loose clothing or jewels; they could
be caught by moving parts. When working in the open air, it is recommended that rubber gloves
and anti-skid heeled shoes are worn. Wear a hair net if you have long hair. Do not make the radius
of your action too wide. Avoid adopting a position which is tiring for the body; ensure that your
support on the ground is firm, and keep in balance at all times. Always be attentive. Look at your
work, act in a sensible way and do not use the tool when you are tired.