www.elorapower.com
ELORA 3 STATION CHARGING CABINET
Owner’s Manual
|
4
INTRODUCTION
KEY FEATURES & BENEFITS
STANDARD FEATURES
Simultaneous Charging for all ELORA batteries
300W Output
Full InterActive
®
technology (including I-Min), which
makes 3 simultaneous charge termination systems,
rejuvenation modes, and LifeSaver
®
maintenance mode.
UV LED to aid in disinfection control during the charging
process
LED “ready” Indicator Lighting
LED INDICATOR LIGHTS
The Elora Battery Charging Cabinet contains a series of
LED indicators that inform the user of the current status of
each battery.
UV LED
When a battery is first placed onto a station and the door
is closed, the UV LED will begin the disinfection cycle to
aid in keeping the battery germ and bacteria free. This is
indicated via the violet LEDs that will illuminate the charging
station. If the cabinet door is opened during disinfection
the cycle will be suspended while the door is open
and will recommence once the door has been closed.
Once the battery has completed the disinfection cycle the
LEDs inside the cabinet will indicate the current state of
the battery.
BLUE LED
An illuminated blue LED indicates that the battery has
been completely charged and is ready for use.
GREEN LED
An illuminated green LED indicates that the battery has
been completely charged, is ready for use and has the
highest capacity (run-time). This is the battery that should
be removed first. Only one battery will indicate green at
a given time. Once this battery has been removed the
next fully charged battery (if available) will illuminate green
indicating that it is ready for use and has the highest
capacity (run-time). This assures that not only will the
battery with the highest capacity be used but also ensures
that only batteries that have been fully charged will be
put into workflow, ensuring that the workflow will not be
interrupted prematurely.
The Elora Battery Charging Cabinet is a wall mountable charger capable of charging 3 batteries
in parallel. The cabinet can be mounted flush to the wall or recessed for a more aesthetic appeal.
Like all Elora chargers, everything is automatic. Once a battery is placed onto one of the
stations the charger will read the battery’s current state of charge and will then automatically go
into one of the applicable Three Stage Charging modes. At the same time the charger will begin
a disinfection sequence via its UV LEDs that will aid in keeping the battery germ and bacteria
free.
When the user is prepared to remove a battery from the Elora Charging Cabinet, a green LED will
illuminate the battery that should be used next. This feature ensures that all batteries throughout
the fleet are used equally to ensure maximum battery life.
