-
www.elonex.com
10 -
5. Installation
Step 1:
System connection examining
Please refer to the receiver connecting diagram, check the
antenna cable, and make sure you are in the broadcast coverage
area for Digital TV
Step 2:
Switch on the power of the
7” LCD TV
After connecting all the cables, power on the
7” LCD TV.
The power indicator light turns on (red). (If
the 7” TV has already
Scanned for channels, there will be a Channel No. and Signal
Quality banner on the TV screen.)
Step 3:
All Auto Search
In case of without pre-exist programs, there will be open only
screen logo picture on the screen. Please press remote controller
"MENU", Use the "Left" or "Right" cursor button to select
"Channel Setting", then select related factors for preparing to
search and finally press "OK" start program searching.
User can find detailed searching information: during the
procedure of program searching. When searching finished, there
