Safety
8
Risk of burns from hot surfaces
The temperature of the SmokeFit may exceed 180°C (355°F).
Allow the SmokeFit to cool down before touching it.
Always wear thermal protective gloves to hold the SmokeFit and
during handling the combisteamer.
Do not use the cool-down mode during operation.
Risk of damage through falling down
The power supply must be properly routed during operation.
2.2.3
Cleaning
Risk of burns from hot surfaces
Do not touch the SmokeFit before it has cooled down.
Risk of chemical burns from cleaning and rinse agents
Observe the safety information for the prescribed cleaning and rinse
agents (see section 6.3).
For manual cleaning:
Wear protective clothing (e.g. long-sleeved clothing, protective gloves
and glasses).
Allow the SmokeFit to cool down before cleaning it.
Do not inhale spray mist from the cleaning and rinse agents.
Material damage from improper cleaning
Do not clean the housing with the hand shower, water jets, steam
cleaners or high-pressure cleaners.
Use only the prescribed cleaning and rinse agents (see section 6.3).
Do not clean the housing with flammable cleaning agents.
Observe the cleaning intervals (see section 6.2).
2.2.4
Maintenance
Risk of fire from improper maintenance
Make sure that only an Eloma service partner carries out
maintenance work.