
Cleaning and care
19
6.2
Cleaning intervals
WARNING!
Risk of fire due to residues in the SmokeFit!
Burns and material damage
Clean the SmokeFit before and after every use.
6.3
Prescribed cleaning and rinse agents
_6.doc @ 158387 @ 2 @ 1
Do not use a high pressure cleaner to clean the SmokeFit.
Do not use the autoclean function of the combisteamer to clean the
SmokeFit.
Do not use acids or expose the SmokeFit to acid fumes. This will
damage the coating the SmokeFit may change color.
Do not use abrasives or corrosive agents.
Do not use steel wool, wire brushes, scrapers or other sharp cleaning
devices.
Cleaning the seal of the combisteamer after each use with a non-
abrasive agent will avoid undesireable odors.
The following cleaning and rinse agents are approved for cleaning the
SmokeFit:
mild detergent and a soft cleaning sponge
6.4
Cleaning the box manually
WARNING!
Personenschaden durch elektrischen Schlag!
Verbrennungen
Make sure that the SmokeFit is disconnected from the power supply
1. Throughly remove all residues like fat, food, etc.
2. Treat heavily soiled areas with a water soluble degreaser.
3. Dry the SmokeFit.