Elo TouchSystems MonitorMouse, Руководство пользователя, Страница: 45 / 54

40 Appendix B - Driver Command Reference
and the <controller> parameters are:
<controller>,<COM port #>, <baud rate> for serial touchscreen
controllers.
<controller>,<base port>,<interrupt (IRQ)> for PC-Bus touchscreen
controllers.
<controller> for Micro Channel
touchscreen controllers.
F
LAGS
The following <flags> may be specified on the DEVICE=MONMOUxx command
line in any order, upper or lower case, separated by spaces. No flags are required
during initial installation. Some flags will be added and updated by the
Touchscreen Control Panel program, ELOCAL2.EXE.
-c<n1,..,n6> The -c flag lists the n1-n6 calibration points in the order
XLow, XHigh, YLow, YHigh, ZLow, ZHigh. Calibration
points are determined and updated by the Touchscreen
Control Panel program.
-s<+/-> The -s+ flag may be added by the Touchscreen Control
Panel program after calibrating to correct swapped X and
Y axes due to incorrect cabling. -s- is the default.
-m<n> The -m flag specifies the mouse button emulation mode,
identical to the modes used in MonitorMouse for DOS,
Windows, Windows NT, and Macintosh. Mode 6 is
suggested for general use in Presentation Manager. The -m
flag can be changed with the Touchscreen Control Panel
program. -m6 is the default.
-b<+/-> The -b+ flag enables a "click" sound on touch. The -b flag
can be changed with the Touchscreen Control Panel
program. -b+ is the default.
-a<x>,<y> The -a flag specifies the size of the double-click area in
pixels. This area is used for detecting double-clicks in
mouse button emulation mode 6. Normally, OS/2 expects
a double-click to be on the same pixel—easy to do with a
mouse, but almost impossible with a touchscreen. By
expanding this area, it becomes easier to double-click by
double-tapping anywhere within this area. The defaults for
<x> and <y> are calculated after you calibrate with the