© Copyright 2021 Elo Touch Solutions, Inc.
14
23
24
A
C
B
Place I-Series on surface near stand head, within reach of
cable. Remove cable door (A), plug in power cable (B)
and replace cable door (C) as shown.
Add tie-wrap
Route
,
LAN cable
through bottom of stand
head. Route
USB Hub
cable or other
USB
if used.
Mount I-Series, then add bottom VESA screws:
15”: add (2) screws from bag “M” to bottom
75mm VESA positions.
22”: add (2) screws from bag “N” to bottom
100mm VESA positions.
