Elo TouchSystems Backpack, Руководство пользователя

Страница: 29 / 38

UM600183 Rev. A, page 29 of 38
User Manual – I-series 2.0
Section 5: Regulatory Information
Electrical Safety Information
Compliance is required with respect to the voltage, frequency, and current requirements indicated on the manufacturer’s label . Connection
to a different power source than those specified herein will likely result in improper operation, damage to the equipment or pose a fire hazard if
the limitations are not followed.
There are no operator serviceable parts inside this equipment. There are hazardous voltages generated by this equipment which constitute a
safety hazard. Service should be provided only by a qualified service technician.
Contact a qualified electrician or the manufacturer if there are questions about the installation prior to connecting the equipment to mains
power.
Emissions and Immunity Information
Notice to Users in the United States: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to
Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications.
Notice to Users in Canada: This equipment complies with the Class A limits for radio noise emissions from digital apparatus as established by the
Radio Interference Regulations of Industrial Canada.
Notice to Users in the European Union: Use only the provided power cords and interconnecting cabling provided with the equipment.
Substitution of provided cords and cabling may compromise electrical safety or CE Mark Certification for emissions or immunity as required by
the following standards:
This Informat ion Technology Equipment (ITE) is required to have a CE Mark on the Manufacturer’s label which means that the equipment has
been tested to the following Directives and Standards: This equipment has been tested to the requirements for the CE Mark as required by EMC