Elo TouchSystems ET2639L User Guide 8
Interface Connection
Connector Panel on Rear side of Monitor
DVI-D cable
(not included with
ET2639L-xxxx-x-
A-x models)
Analog Video
Cable
OSD box
connector
Power Cable
Power
Button
USB cable
Serial Cable (not
included with
ET2639L-Axxx
models)
To connect your touchmonitor to your computer:
1
Connect the power cable to the rear panel of the monitor and the
other end to the power outlet.
2
Connect either the USB cable
OR
the serial cable to the rear
panel of the monitor.
Note: Do not use both.
Connect the other
end to your computer.
3
Connect the video cable
and/or
the DVI-D cable to the rear panel
of the monitor. Tighten by turning the two thumb screws clockwise
to ensure proper grounding. Connect the other end to your
computer.
4
Connect the OSD control box to the monitor.
5
Press the power button on the rear panel to turn the monitor on.
