C-Series Touchcomputer for Healthcare Applications User Guide
40
b) If you determine that this equipment is causing the interference, try to
correct the interference by using one or more of the following measures:
i) Move the digital device away from the affected receiver.
ii) Reposition (turn) the digital device with respect to the affected
receiver.
iii) Reorient the affected receiver’s antenna.
iv) Plug the digital device into a different AC outlet so the digital device
and the receiver are on different branch circuits.
v) Disconnect and remove any I/O cables that the digital device does
not use. (Unterminated I/O cables are a potential source of high RF
emission levels.)
vi) Plug the digital device into only a grounded outlet receptacle. Do not
use AC adapter plugs. (Removing or cutting the line cord ground may
increase RF emission levels and may also present a lethal shock
hazard to the user.)
vii) If you need additional help, consult your dealer, manufacturer, or an
experienced radio or television technician.
III. Agency Certifications
The following certifications have been issued for the touchcomputer:
UL (UL 60601-1)
cUL
(CAN/CSA-C22.2
No. 601.1-M90)
TUV (EN 60601-1)
IPX1
FCC (Class A)
CE (Class A)
VCCI (Class A)
C-Tick (Class A)
CB (IEC 60601-1)
Elo Declarations:
RoHS., WEEE, CE
