The lower display brackets must be installed using the center
mounting hole of the mounting pad and the left/right mounting
hole.
Upper Display Bracket
I/O Connections must point towards
the floor when wall mounted
Step 3d: Attach upper and lower display brackets (Portrait orientation with ECM)
• Secure the upper display bracket to the upper mounting pads using two ECM spacers and four
M6x34 screws.
• Secure lower display brackets to the other two mounting pads using one ECM spacer and two
M6x34 screws. Ensure the lower brackets are installed according to notes 7-8 below.
• Proceed to step 4.
Note 7
Note 8
Mounting pads with
ECM spacers
1/4” (5mm)
Loosely install an M4 screw into
each lower bracket as shown.
Leave about 5mm (1/4”) of
space under the head. The m4
screw on the left bracket should
point left and the M4 screw on
the lower right bracket should
point right.
Lower Display Bracket
