Step 5: Attach IDS Display to wall brackets (all configurations)
• Elo recommends at least two people lift the IDS display onto the wall mount brackets.
• Tilt the monitor slightly back while lifting it onto the upper wall bracket. Ensure both pivot
screws on the upper monitor bracket are engaged in the hooks on the upper wall bracket. You
should be able to pivot the IDS Display forward a few inches when correctly installed.
• As the IDS Display pivots back against the wall, ensure both M4 screws installed on the lower
monitor brackets engages the slots on the lower wall bracket. If the M4 screws do not engage
the slots on the lower wall bracket, adjust the height of the lower wall bracket as needed to al-
low the screws to engage the slots.
