User Manual: X-Series Rev A AiO Touchcomputer
SW602213 Rev A, Page 8 of 51
1
Display w/Touch SRN
12 +24V Power USB Port (X3/X5/X7 only)
2
Speaker (built-in)
13 Serial Port (RS-232)
3
Front OSD Control Buttons
14 VGA Output (D-Sub)
4
Wireless indicator LED
15 USB 3.0 Port
5
Power indicator LED
16
USB 2.0 Port (X2/X3)
USB 3.0 Port (X5/X7)
6
Stand Module
17 Ethernet LAN Port
7
Cable Cover
18 Serial Port (RJ-45)
8
Expansion Module (Optional)
19 Audio Port (Line-out)
9
Edge USB port (Accessory KITs)
20 Front USB Port
10 Kensington Lock
21 Microphone (built-in)
11 Power Connector (DC-IN)
22 Cable Exit Hole
1. Display w/Touch SRN
The main display with different touch screen solution is made by two different sizes, 15-inch and
17-inch. The touch technology is defined as below touch type for composition of the system.
-
AccuTouch (“micro bezel” resistive).
- Intellitouch Plus (zero-bezel multi-touch surface acoustic wave).
- Intellitouch (single-touch surface acoustic wave).
- Intellitouch Pro (projective capacitive).
2. Speaker (built-in)
The integrated speaker provides audio output for video and music playback.
3. Front OSD Control Buttons
The front OSD control buttons provide the OSD functions control.
4. Wireless indicator LED
Flashes blue when the X-Series is connected to a Wi-Fi network and flashes blue when the
X-Series Bluetooth is on.
5. Power indicator LED
The power indicator LED is to show the state of the touchcomputer. The table below shows LED
state and corresponding colors.
6. Stand Module
The stand module is a strong design to support all 15-inch and 17-inch Elo All-In-One
Touchcomputers.
7. Cable cover
Open the back cable cover to access the system IO function ports.
