Elo Touch Solutions 01 series, Руководство пользователя

Страница: 32 / 47

User Manual
–
IDS01 SW601990 Rev. M,, page 26 of 47
Table Top Mode
Requirements:
1. The Table Top Mode function on the OSD must be enabled if the unit is placed in table top orientation.
2. Cooling methods must be put in place to ensure that the air temperature beneath the monitor does not
exceed the operating specifications. Consult chapter 7 for operating temperature specifications.
Note: The warranty will be void if failure occurs to the monitor in table top mode orientation and the Table
Top Mode function is not enabled without adequate cooling methods installed
.
When the monitor is in Table top mode, the Thermal Protection steps are different. These OSD values are stated in
the table below.
Monitor Size
Thermal Protection Mode
Enabled Step 1 (°C)
Thermal Protection Mode
Enabled Step 2 (°C)
Thermal Protection Mode
Enabled Step 3 (°C)
Auto Shut Off Temperature (°C)
ET3201L/4201L
60 65 70 75
ET5501L/ET5501LT
57 61 n/a 65
ET5551L
59 64 n/a 68
ET7001L/ET7001LT
59 64 69 74
Intelligent Brightness Control
The IDS 01 touchmonitors include a light sensor that adjusts the brightness of the screen in accordance with the
ambient light level surrounding the monitor.
Note: When the Thermal Protection Mode is activated, the Intelligent Brightness Control feature will act within the
limits set forth in the Temperature Control section.
Video Firmware Upgrade
The IDS 01 series touchmonitors allows for updating the video firmware using an external computer. Contact Elo
customer service for information on how to upgrade the video firmware.