Elnur
powered by Gabarrón | RXE PLUS | Installation Guide
4
3. USING THE THERMAL RADIATOR
RXE Plus models have built in an electronic thermostat
with a sensibility of 0.1 ºC. It is possible to set
temperatures with an accuracy of 0.5ºC.
The daily or weekly programmer (selectable) allows you
to allocate three different temperature levels to any of
the 48 intervals of 30 minutes of the day.
Key “+”:
It increases the values.
SUN indicator
SUN key:
Press once to see the
SUN temperature value.
Press + or – keys to
modify the value.
MOON key:
Press once to see the
MOON temperature
value.
Press + or – keys to
modify the value.
Moon indicator
Key “+”:
It decreases the values.
Digital DISPLAY:
It shows the time,
temperature and
other messages
Heating indicator:
This small dot will be
lit when the heater is
consuming energy.
Frost protection key:
If the display shows the
time the heater is in frost
protection mode.
Press this key to shift from
frost protection mode to
standard mode and vice
versa.
Press this key for more
than two seconds to set
the time or day of the
week.
PRG key:
Allows you to create check
or modify programs.
Move forward with + or –
keys and allocate the
SUN, MOON, or
temperature to any of the
48 intervals of 30 minutes
of the day by means of
the relevant key.
Selector:
0 The heater is switched off
permanently.
P The heater is following a program.
I The heater is maintaining the SUN
temperature constantly.
Both indicators will be lit at the
same time
Digital Control with Daily and Weekly Programming
GABARRON
´
