Elnur
powered by Gabarrón | RXE PLUS | Installation Guide
3
2: INSTALLATION INSTRUCTIONS
Position and fix the brackets at the correct distance
from the floor. It is possible to use the radiator as
measuring unit by positioning it on two polyester
package elements and placing two supports above
as indicated on the figure (shown right):
- The studs and screws to attach the supports are
in the accessories bag.
- Hang the unit on the hooks of the brackets.
- By turning the screws, the metallic square will
go downwards, retaining the heater. Repeat this
on the other bracket.
- Open the package and check that it is the correct
model and it is in good condition.
- To obtain optimum performances it is necessary
to maintain a minimum clearance of 15 cm between
the radiator and any inflammable material as
furniture, curtains etc.
- The rest of clearances required to maintain are
indicated on the figure opposite:
