7
WEEKLY PROGRAMMES
It is possible to allocate different programs to different days of the week. To do this, the controller has to be upgrade from 24hr mode (factory
default) to 24hr/7days mode as follows:
Move the selector to
0
position, the display will be Off. Press the
key and at the same time turn the selector to
P
position maintaining the
key at least five seconds. The display will show
P-SE
which means that weekly mode has been set.
SETTING THE DAY: Press the
key more than two seconds and the display will show the number of the day. Set the correct number, if
required, by pressing
+
or
–
keys. Press the
key and the display will show now the time. Press again the
key and new values will be
stored.
To check a programme or to make a new one press
PRG
key: The display will show
dia1
. Press again
PRG
key and the display will
show
00:00
intermittently. Follow now the steps from DAILY PROGRAMMES section until the display shows again
dia1
. Repeat this
process with the 7 days of the week. When the display shows
dia7
the weekly program will be stored by pressing
+
key.
If the display shows
dia1
then, pr key more than three seconds will copy the day 1 program to day 2 and so on.
It is possible to allocate any of the three temperature levels to all the intervals of any day maintaining the relevant
T
key
until an audible signal is heard.
To turn back a controller from 24hr/7days to a single 24hr press
PRG
key more than six seconds. This will restore the factory default settings.
KEYBOARD LOCK
Press the
T
key more than six seconds and the keyboard will be locked. The display will show
and the controller will keep on
working internally. To unlock the keyboard press again the
T
key more than six seconds.
4. - CLEANING AND MAINTENANCE
Clean and dust with a dry, soft cloth only when the unit is disconnected and cold.
Do not use solvents or abrasive products for cleaning.
This thermal radiator has been manufactured under an assured quality system using environment friendly processes.
Please take the heaters to a clean point once their useful life is finished, in order to recycle their materials in the right way.
5. - TROUBLESHOOTING
- The thermal radiator does not heat.
Check the heater or the air inlets are not covered.
Digital models: the display shows the time press the
T
key to switch on the heater. Check that the DAY
or NIGHT temperatures are right.
- The room does not reach the right
temperature.
Check the selected temperature is in accordance with the desired temperature. Maybe the room needs
more heating power.
- DAY and NIGHT luminous indicators
are lit at the same time.
Digital models: Continuous mode has been selected. Turn the knob to the “P” position to return to the
Program mode if required.
- The display shows “Err1” or “Err2”
Digital models: Contact the after sale service.
- Only daily programmes.
The controller is in a single 24hr mode (factory default). See WEEKLY PROGRAMMES section to swift to
24hr/7days mode.
- The keyboard is locked.
If the display shows
the keyboard is locked. To unlock the keyboard press the
T
key more
than six seconds.
