5
DIGITALS MODELS RX-E
Digital models have built in an electronic thermostat with a sensibility of 0.1 ºC. It is possible to set temperatures with an accuracy of 0.5ºC.
The daily or weekly programmer (selectable) allows you to allocate three different temperature levels to any of the 48 intervals of 30 minutes of the
day.
SWITCHING ON THE HEATER AND SETTING THE TIME
Turn the mode selector dial to
P
position and press the
key more than two seconds. The display will show the time intermittently. Set the
minutes by pressing
+
and
-
keys and press the
. Set the hours the same way. Press once more the
key to store the time. If at any time it
is necessary to set the time press the
key and repeat the above steps.
FROST PROTECTION MODE
T
:
With this mode on, if the room temperature drops below 3ºC the heater will connect itself automatically.
If the display shows the time the heater is in frost protection mode. Press the
T
key to shift from frost protection mode (time is shown in the
display) to standard mode (temperature is shown in the display) and vice versa.
SELECTOR “O”, “P”, “I”.
Position “0”: The heater is switched off permanently. The display is switched off.
Position “P”: The heater is following a program. It will maintain the SUN, MOON or
T
temperatures as per the introduced program. At this
position if the display shows the time the heater is frost protection mode.
Position “I”: The heater is maintaining the SUN temperature constantly both luminous indicators SUN and MOON will be lit. This could be useful
when SUN temperature is required and we do not want to modify the program. At this position if the display shows the time the
heater is in frost protection mode.
Press the
T
key to shift from frost protection mode (time is shown in the display) to standard
mode (temperature is shown in the display) and vice versa.
Digital DISPLAY:
It
shows
the
time,
temperature
and
other
messages.
Frost protection key:
If the display shows the time
the heater is in frost protection
mode. Press this key to shift
from frost protection mode to
standard mode and vice versa.
Heating indicator:
This small dot will be lit when
the heater is consuming
energy.
SUN indicator
Press this key for more than
two seconds to set the time or
day of the week.
PRG key:
Allows you to create check
or modify programs.
Move forward with + or –
keys and allocate the SUN,
MOON, or
T
temperature to
any of the 48 intervals of 30
minutes of the day by means
of the relevant key.
Key + :
It increases the
values.
SUN key :
Press once to see the SUN
temperature value.
Press + or – keys to modify
the value.
MOON key :
Press once to see the
MOON temperature value.
Press + or – keys to modify
the value.
MOON indicator
Key - :
It decreases the
values.
Selector:
0 The heater is switched off
permanently.
P The heater is following a
program.
I The heater is maintaining
the SUN temperature
constantly. Both indicators
will be lit at the same time.
