Combined Storage Heaters
6
5.- USING THE CONVECTOR
Switch on the convector by setting the switch placed at the lower left side of the heater marked – o to “-“.
The off position is marked “0”.
When the convector is generating heat, the neon indicator on the switch will be illuminated.
The convector is fitted with an adjustable thermostat, which enables room temperature to be controlled by
adjusting the setting accordingly when the convector is on.
Turn the thermostat control to the maximum (fully clockwise) and when the desired temperature has been
reached, turn the thermostat slowly to the left (anti-clockwise) until the luminous indicator switches off.
By leaving in this position, the heater will automatically maintain the selected temperature.
It is recommended to switch off the convector at the beginning of the overnight charge.
Models CSH12A, CSH18A and CSH24A:
The direct acting convector element should be switched off prior to the
storage heaters night time charge period engaging. This is to avoid the
possibility of the automatic charge regulator reducing the total charge taken,
due to it reading a high room temperature.
6.- WIRING DIAGRAMS
R1, R2, R3, R4
…
Heating elements
C
……
.. Switch
CE
……
........Convector element with built in thermal cut out
PE
……
.Earth
RAC
………
...Accelerating resistance
L
………
.Phase
Tc
…………
...Charge control thermostat
N
……
...Neutral
Ta
…………
...Ambient thermostat
Ts
……
..Safety cut out