background image

 
 
 
 

 

 

 
 

TOWEL RAIL 

 

 

INSTRUCTIONS FOR INSTALLATION AND USE  

 

 

TBB8   (white)   300 W  

 

TBB12   (white)   600 W 

 

 

All models are IP44 rated and are suitable for use in bathrooms. Please read these instructions before installing or using this appliance for the first time. 

 

 
 
 
 

1.- IMPORTANT 

 

The warranty of the towel rail will not cover any damage caused by 
the non observance of any of these instructions. 

 

This guide must be kept and given to any new user. 

 

Please, check that the voltage in the rating label fits the power 
supply. 

 

The installation must be carried out in accordance with the current 
electrical regulations. 

 

The installation of the towel rail should be carried out by trained 
personnel. 

 

The use of electric towel rails is forbidden in any area where there 
is a presence of gases, explosives or inflammable objects. 

 

The towel rail should not be installed exactly under an electric 
outlet.  

 

The appliance must be installed in such a way that it is impossible 
for anyone using a bath or shower, to touch the controls. 

 

The surfaces of the towel rail can be hot and caution is advised 
when small children are near the appliance.  

 

Installation should be in such a way so that children cannot use it as 
a stairway or ladder.  

 

If the supply lead of the towel rail is damaged it must be replaced by 
service personnel authorized by the manufacturer, since special 
tools are needed.  

 

Before carrying out any work inside the appliance, the towel rail 
must be disconnected from the electricity supply. 

 

All the models incorporate a safety device. This will disconnect the 
towel rail if for some reason it fails. If the safety device activates the 
towel rail will need to be repaired by service personnel authorized 
by the manufacturer.  

 

The presence of air particles of smoke, dust and other pollutants 
could, in time, discolour the walls and surfaces around the  towel 
rail. 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

2.- INSTRUCTIONS OF INSTALLATION 
 
The towel rail is designed to only work in a vertical position and fixed to 
the wall, never to the ceiling. 
 
The fixation to the wall is carried out by means of the three supports 
given with the appliance, according to the following outline. 
 

*

*

 

 

 
 
A clear distance of 5 cm must be allowed around the towel rail. 
 
The towel rail supports should be placed in sequence as indicated 
below.  
 
 

 

Отзывы: