Elnec BeeHive304, Руководство пользователя

Страница: 150 / 152

Elnec s. r. o.
150
If you have an unsupported target device
If you need to operate on a target device not supported by the control program for
programmer, please do not despair and follow the next steps:
Look in the device list of the latest version of the control program on our Internet site
(section Download, file corresponding to your programmer). Your new target device might
already be included in this version! If yes, download the file pg4uwarc.exe and install the
new version of the control program.
Contact Elnec directly, filling up the " AlgOR " form following the instructions at the end of
this form. We may need detailed data sheets of your target device and, if possible, samples.
Warranty terms
The manufacturer, Elnec s.r.o. Presov, Slovakia, provides a guarantee on failure-free
operating of the programmer and all its parts, materials and workmanship for
three-year
(BeeHive304 and BeeProg3) from the date of purchase. If the product is diagnosed as
defective, Elnec s.r.o. or the authorized repair center will repair or replace defective parts at
no charge. Parts used for replacement and/or whole programmer are warranted only for the
reminder of the original warranty period.
Warranty for programming modules is limited by mechanical lifetime of ZIF socket. The
lifetime of ZIF socket is different at particular adapter; you can find information about
mechanical lifetime of ZIF socket of particular adapter on our web site: Products -
Programming Adapters ... - click on desired kind of adapter. This warranty covers mechanical
lifetime of ZIF sockets only. This warranty doesn't cover wear and tear; e.g.
higher/undefined/fluctuating contact resistance caused by dust/dirt, or by materials rubbed off
from programmed devices leads.
For repair within the warranty period, the customer must prove the date of purchase.
This warranty terms are valid for customers, who purchase a programmer directly from Elnec
company. The warranty conditions of Elnec sellers may differ depending on the target country
law system or Elnec seller’s warranty policy.
The warranty does not apply to products which are a subject of wear and tear or mechanically
damaged. Equally, the warranty does not apply to products opened and/or repaired and/or
altered by personnel not authorized by Elnec, or to products that have been misused,
abused, damaged by accident or that were improperly installed.
Repairs which does not fall under conditions mentioned above will be billed according to the
costs of replacement parts, service time and shipping. Elnec or its distributors will determine
whether the defective product should be repaired or replaced and decide whether or not the
warranty applies.
Elnec puts its best effort to develop hardware and software that is stable and reliable. Elnec
does not guarantee that the hardware and software are free of "bugs", errors or defects.
Elnec's liability is always limited to contract's net value paid by a buyer.