Elna Xchange
18
The “Status Bar” provides information about four important items.
-
"Size" – displays the size of the design
-
"Pos" – displays the position of the design relative to the center of the hoop
-
"St" – displays the stitch count of the design
-
"Clrs" – displays the number of colors of the design
OPTIONS MENU
Hoop Size
Click
Options,
then
Hoop Size
or
to select the brand of machine and hoop size as
shown below.
The workspace grid will increase or decrease in size to show the work area available for the
selected hoop size.
Each square of the grid equals 10 mm X 10 mm. The design you select will not be written to
a card if the design size exceeds the maximum allowable hoop size for your machine.
Density Settings (for GNC Designs Only)
Click
Options,
then
Density Settings
or
to bring up the dialog box. Density Settings
only work with GNC designs.
Preferences
Click
Options,
then
Preferences
to bring up the dialog box. Several options can be selected
depending on the brand of sewing machine you are using.
The setting for Elna/Janome/New Home software will ensure that when you save to *.SEW
format it will be compatible with Scan-n-Sew PC V1.x. The Dream Vision/ Customizer 2000
when selected will enable 78 colors for Elna/Janome/New Home in your color palette.
Click
OK
to apply selected preferences. Click
Cancel
to close the dialog box preferences
without making any changes to the software.
Содержание XCHANGE
Страница 1: ...Elna Xchange 1 INSTRUCTION MANUAL...