ELNA eXperience 580, Инструкция по эксплуатации

Страница: 82 / 84

80
Warning Sign Cause Try this
1. The start/stop button is pressed with the foot control
connected.
2. The foot control is out of order.
(The foot control sign keeps blinking.)
Disconnect the foot control.
Contact the service center
or the store from whom the
machine was purchased.
The machine is started without lowering the presser foot.
The machine will stop if the presser foot is raised while
sewing.
Lower the presser foot and
start the machine.
Lower the presser foot and
start the machine again.
The bobbin winder spindle is shifted to the right. Shift the bobbin winder
spindle to the left for
stitching.
The machine will stop if the buttonhole is sewn without
lowering the buttonhole lever.
Lower the buttonhole lever
and start the machine again.
The twin needle key is pressed when a pattern unsuitable
for twin needle sewing has been selected.
Select the pattern suitable
for twin needle sewing.
The twin needle key is pressed when the twin needle sign
is indicated on the LCD screen.
Replace the twin needle with
a single needle and press
the twin needle key.
The machine is started after halting due to overload. Wait for at least 15 seconds to
restart.
Turn the power switch OFF.
Remove tangled threads
around take-up lever, hook
race and automatic thread
cutting mechanism.
The selected stitch pattern cannot be flipped. Select the other stitch
pattern for a mirror image.
The machine does not work properly due to a problem in
the control circuit.
Contact the service center
or the store from whom the
machine was purchased.
Problems and Warning Signals
If a buzzer sounds and the LCD screen shows a warning sign, follow the guidance below.
(E1-E7)
Audible Signal The Buzzer sounds when:
pip Normal operation.
pip-pip-pip Invalid operation or malfunction.
peep E1-E7 error occurred.
pip pi-pi-pi-peep Buttonhole is completed.
It is not abnormal for a faint humming sound to be heard from the internal motors.
The LCD screen and function key area may become warm after several hours of continuous use.