ELNA eXperience 580, Инструкция по эксплуатации

Страница: 15 / 84

13
Changing the Presser Foot
CAUTION:
Always make sure to turn the power switch off before
replacing the presser foot.
Use the proper foot for the selected pattern.
The wrong foot can cause the needle to break.
Raise the needle to its highest position and raise the
presser foot lifter.
Press the red button on the back of the foot holder.
The presser foot will drop off.
q
Red button
w
Presser foot
q
t
w
Attaching the presser foot
Place the presser foot so that the pin on the foot lies just
under the groove of the foot holder.
Lower the presser bar to lock the foot in place.
Each foot is marked with an identification letter.
e
Groove
r
Pin
t
Identification letter
e
r
Attaching the foot holder
Attach the foot holder to the presser bar from the rear.
Tighten the thumbscrew securely with the screwdriver.
Removing and Attaching the Foot Holder
CAUTION:
Always make sure to turn the power switch off before
replacing the foot holder.
Removing the foot holder
Raise the needle to its highest position and raise the
presser foot lifter.
Loosen the setscrew.
Remove the foot holder.
q
Presser bar
w
Foot holder
e
Setscrew
q
w
w
e
q
e