ELNA eXcellence 760, Инструкция по эксплуатации

Страница: 68 / 112

66
button Sewing
Machine settings
q
Pattern: 34
w
Thread tension: AUTO
e
Presser foot: Button sewing foot T
r
Foot pressure: 5
t
Feed dog: Lowered
q
w
q
e
w
r
Attaching the button sewing foot T
Insert the rear pin on the foot into the rear groove of the
foot holder.
q
Rear pin
w
Rear groove
Gently lower the presser bar while holding the foot with
your fingers.
Sewing
Lower the feed dog.
Place a button on the fabric and lower the needle into the
left hole of the button by turning the handwheel with your
hand.
Lower the foot to hold the button in place, aligning the
direction of the button.
Raise the needle by turning the handwheel until the
needle bar swings to the right.
Press the stitch width adjusting key so the needle enters
into the right hole of the button.
Start sewing and continue until the machine stops
automatically.
Remove the fabric from the machine.
t
NOTE:
Do not use the thread cutter button to cut the threads.
Otherwise, you cannot tie the threads.
Pull the bobbin threads to bring the needle threads down
to the wrong side of the fabric.
Tie the threads together.