ELNA 5200, Инструкция по эксплуатации

Страница: 62 / 98

56
!0
b
Start the machine to sew the buttonhole.
The buttonhole will be automatically sewn.
Step 1: The machine will sew the front bartack and
the left row first.
Then it goes back to the starting point with
straight stitch.
Step 2: The machine will sew the right row.
Step 3: The machine will sew the back bartack.
Step 4: The machine will stop automatically and a dot
will blink
!0
.
To sew another buttonhole, raise the presser foot.
Move the fabric to where the next buttonhole is to be
sewn, then lower the foot and start the machine.
n
Remove the fabric and place a pin
!1
just below
the bartack at each end to prevent accidentally
cutting stitches. Cut the opening with the seam
ripper
!2
. Use an eyelet punch
!3
to open a
keyhole buttonhole.
m
When buttonhole sewing is finished, push the
buttonhole lever
t
upward as far as it will go.
NOTE:
If you select other pattern without raising the presser
foot or buttonhole lever after buttonhole sewing, the
indicator will show a warning sign.
Raise the presser foot and buttonhole lever, then
select the pattern.
b
n
m
!1
!2
!3
t
Step 1
Step 2
Step 3
Step 4
If you start sewing the buttonhole without lowering the
buttonhole lever, the indicator will show a warning
sign.
Lower the buttonhole lever, then restart the machine.