ElmoTech 1TRACK, Инструкция по установке и эксплуатации

Страница: 13 / 23

2 Installing the 1TRACK Unit
9
8. Set the 1TRACK unit on a flat surface with the Activation
button facing upwards and lay the strap flat along the
surface.
9. Place the second pin tray on
a flat surface and keeping
the strap oriented as in step
8, insert the cut end of the
strap into the pin tray.
10. Place the 1TRACK unit on
the Offender’s leg just
above the ankle bone and
insert the end of the strap
with the attached pin tray
into the bracket until it
snaps in place.
11. Press and hold the Activation button on the front of the
1TRACK unit until the unit vibrates once and the PWR, GPS,
and Zone LEDs begin to flash green.
12. Call the monitoring center and request that they download
the Offender’s program to the unit.
13. Take the 1TRACK unit outside to enable it to acquire a GPS
signal.
Once GPS has been acquired, the 1TRACK unit vibrates once
and the GPS and Zone LEDs stop flashing. The PWR LED
continues to flash green, indicating that the unit is on.
The 1TRACK unit is successfully activated.