ElmoTech 1TRACK, Инструкция по установке и эксплуатации

Страница: 11 / 23

2 Installing the 1TRACK Unit
7
2. Into each bracket on the
back of the 1TRACK unit,
insert a tamper plug:
a. Loosely place the tamper
plug into the hole in the
bracket.
b. Place your finger over
the right side of the
tamper plug and press
downward at a
45 degree angle
towards the left.
The tamper plug sinks
into place.
3. Place the pin tray on a flat
surface, such as a desk, and
push one end of the strap
into the pin tray until it is
level with the “lip” of the
pin tray.
Make sure that there is no
gap between the end of the
strap and the edge of the
pin tray.
4. Insert the strap with the
attached pin tray into one
side of the 1TRACK unit
until it snaps in place.