9
GENERAL SAFETY WARNINGS
To avoid damage and dangers due to improper use, carefully follow
the instructions for use and keep them in a safe place.
If the product is handed over to a third party also provide the
instruction booklet.
UNPACKING AND INSPECTING THE PRODUCT
Remove the product from its packaging and make sure it is intact and has no visible
signs of damage caused during transport.
In case of doubt, do not use the appliance and contact the nearest Technical
Assistance Centre (see "Technical assistance centres (IT)" specified in this manual).
ATTENTION! DANGER FOR CHILDREN.
The packaging materials (bags made of plastic, polystyrene foam,
etc.) must not be left within reach of children as they are potential
sources of danger.
ATTENTION! Appliance with professional performance.
EN
Original instructions
EXPLANATION OF SYMBOLS
Our products comply with the directives that refer to EC marking.
The class II or Double Insulation symbol indicates that this product is
designed so as not to require an earth connection. These products are
designed so that a single fault cannot cause the user to come in contact with
a hazardous voltage, thanks to the casing being made of insulating material.
This symbol indicates that the product meets the requirements of the new
directives introduced so as to protect the environment and must be disposed
of appropriately at the end of its life cycle. Request information from the local
Authorities about the areas dedicated to waste disposal.
This symbol, generally together with the description, informs the user that
there are important operations and instructions to be read.
DO NOT USE THIS APPLIANCE WHILE CLOSE TO BATHTUBS, SINKS OR
OTHER CONTAINERS THAT HOLD WATER.
All the figures and parts detailed in them are shown on page 2 of this manual; the
instructions that follow provide a part reference and the number of the figure, e.g.:
1
(Fig.
A
).
