13
• Slide the guide comb onto the head until you hear it click into place (Fig.
B1
).
• Ensure that the guide comb
5
is correctly inserted.
• Turn on the device.
• Cut the hair; for tips see par. "USEFUL TIPS FOR CUTTING".
Removing the adjustable guide comb
• Turn off the appliance.
• Push the guide comb so that it slides off the appliance (Fig.
B3
).
• Proceed as indicated in chapter “Removing and cleaning the blade block”.
MAINTENANCE
GENERAL CLEANING
Always disconnect the power cord from the mains socket before cleaning.
•
Avoid all risk of electric shock by not cleaning the appliance with water and
do not immerse it in water.
•
Do not use abrasive solutions or concentrated detergents.
• Clean the exterior with a soft cloth or slightly damp cloth.
• After use, make sure that all parts are completely dry.
Removing and cleaning the blade block
• Turn off the appliance and unplug it from the mains socket.
• Remove the guide comb in compliance with the instructions reported in “Using
without the guide comb“.
• Press the central part of the head
3
or
4
(fig.
A
) downwards with your thumb until
it opens (fig.
C1
); then remove it from the appliance.
• Take care not to drop the head
3
or
4
.
• Use the brush provided
7
(fig.
A
) to clean the head and inside the appliance (fig.
C2
,
C3
) .
• Position the tab of the head in its slot and click the unit into position (fig.
C5
).
Lubrication
To ensure that the cutting blade remains sharp, the blade block must be lubricated
(fixed blade and mobile blade) after each use.
It is recommended to apply two to three drops of lubricant
6
(fig.
A
) directly to the
blade block (fig.
C4
).
DISPOSAL
The product packaging is made of recyclable materials. Separate the parts
according to their type and dispose of them in accordance with applicable
laws on the environmental protection.
