12
USING FOR THE FIRST TIME
The appliance can only be charged with:
1)
the power adaptor
9
directly connected to the appliance;
2)
the power adaptor
9
directly connected to the supplementary battery
10
.
•
Connect the power adapter
9
(fig.
A
) to the power supply socket outlet
11
(fig.
A
)
on the bottom part of the appliance or supplementary battery
10
, as illustrated
in figure
B
.
•
Connect the power adapter plug to the socket outlet, making sure that the
appliance is off.
•
Charge the appliance for
8 hours
before using for the first time.
During charging phase of the appliance or the battery, the led flashes.
When charging is complete the led is fixed.
Do not completely discharge the battery in case you wish to use the
appliance with the power supply cable inserted.
Do not charge the appliance for longer than the recommended time;
overcharging reduces the life of the rechargeable batteries.
Before using the appliance, always ensure it is completely dry.
CHARGING AFTER THE FIRST USE.
Do not charge the appliance every day.
•
Ensure that the appliance is completely dry.
•
Ensure that the appliance is off, or turn it OFF from the switch
13
(fig.
A
).
•
Charge the appliance as described in the paragraph “USING FOR THE FIRST TIME.”
PROLONGED PERIOD OF DISUSE
If the appliance is not going to be used for a period greater than six months, it should
be charged for 8 hours, as described in paragraph “USING FOR THE FIRST TIME”, before
being put away into storage.
If the battery discharges and provides little charge, replace it with the same model or
request a replacement from an authorised assistance service.
Recommendations for preserving battery life:
•
Do not charge the appliance every day.
•
Completely drain the battery every six months, then recharge following the
instructions described in the paragraph “USING FOR THE FIRST TIME”.
•
Do not charge the appliance for longer than the recommended time; overcharging
reduced the life of rechargeable batteries.
Fully charge the appliance at least once a year.
To replace the battery refer to the instructions in par. “Battery replacement” (chap.
“MAINTENANCE”).
USE
ATTENTION! Do not use the appliance if the blade of head 2 (fig.
A
) is
damaged or if the blade block is not working correctly.
Do not use the appliance on wet hair.
Elmot 025 Professional Clippers are ideal for trimming hair and beard.
The cutting length can be adjusted to eight different heights, from 1.0 mm to 12 mm.
TURNING THE APPLIANCE ON AND OFF.
Turning on
•
Move switch
13
(fig.
A
) to the ON position; the LED
12
(fig.
A
) will light up blue.
Turning off
•
Move switch
13
(fig.
A
) to the OFF position; the LED
12
(fig.
A
) will go out.
USEFUL TIPS FOR CUTTING
•
Wash the hair as usual, dry and brush it in the direction of growth to untangle
any knots.
