- 61 -
(13) User Setup
Make settings relating to user administration.
• Adding a new user
You can register a login ID, a password, and authority for connection to the Camera.
Designate an authority, enter a login ID and a password, and then click on the [Add]
button. The entered data will be displayed in the list.
The following three items can be registered.
• Administrator................... The administrator authority. The login ID is “root” that is
unchangeable. With this ID, you can view images, operate
the Camera, and make settings.
• Operator ........................... You can view images and operate the Camera.
• User.................................. You can only view images.
* Only “root” can be registered for Administrator, and up to 99 names can be registered
for Operator and User combined. You can use up to 16 one-byte characters for a iogin
ID and password, including alphanumerical characters and upper-case and lower-case
alphabetic characters.
Note
: Two-byte characters, including Japanese characters, are not
available for a login ID and password. Use one-byte alphanumerical
characters.
