Elmo SUV-CAM BWV Скачать руководство пользователя

Страница: 50 / 66

Changing Various Settings on the Setting Item Screen (Continued)

Firmware Upgrade

For the purpose of enhancing the recording function, the recorder can upgrade the firmware (recorder operation program).

Since this upgrading is to change the central function of the recorder, improper upgrading could cause failure to the recorder,
such as no startup.

For upgrading the firmware, only use upgrades distributed from our website http://www.elmo.co.jp/suv-cam/en/index.html.

If any firmware other than the above or the above firmware with the addition of processing is used, it could cause failure.
Therefore, when upgrading the recorder, observe the following procedures with care:

When connecting the recorder with the PC or upgrading, be sure to use both the AC adapter and the battery. Note that if the

power supply is shut off during the upgrading process, the system will fail and will no longer be functional.

When you download the files to PC, select Mass Storage Mode

in the configuration menu (USB mode).

Connect the recorder with the PC. (

P56)

Turn ON the power supply to the recorder. (

P25)

Move the file.
The latest firmware preserved in an arbitrary folder on the personal
computer is moved in the SD card.

※

The SD card is recognized as "Removal disk."

Check the free capacity of the SD card.

Reboot the recorder.
Turn OFF the power supply to the recorder, and unplug the USB cable.
Then, turn ON the power supply again to the recorder.

Display the setting item.
Hold down [MENU].

The firmware is moved here.

Содержание SUV-CAM BWV



































































Результаты поиска

Содержание SUV-CAM BWV

Отзывы:

Похожие инструкции для SUV-CAM BWV

Бренды по названию

Популярные бренды

Elmo SUV-CAM BWV, Инструкция по эксплуатации

Результаты поиска

Содержание SUV-CAM BWV

Отзывы:

Похожие инструкции для SUV-CAM BWV

Бренды по названию

Популярные бренды