Elmo ProVidient EMR-16, Инструкция по эксплуатации, Страница: 73 / 126

Motion Setup
How to conduct Motion Detect Setup.
<Setup Procedure>
1.
Select “ENTER” button of the intended camera.
MOTION SETUP
CAM 1 ENTER
CAM 2 ENTER
CAM 3 ENTER
CAM 4 ENTER
CAM 5 ENTER
CAM 6 ENTER
CAM 7 ENTER
CAM 8 ENTER
CAM 9 ENTER
CAM 1 0 ENTER
CAM 1 1 ENTER
CAM 1 2 ENTER
CAM 1 3 ENTER
CAM 1 4 ENTER
CAM 1 5 ENTER
CAM 1 6 ENTER
MENU
⇒
The Motion Setup Screen will be displayed.
CAM 1 MOTION SETUP
SENS LEVEL 1
Camera No.
Sensitivity
* The background display is live feed from the selected camera.
* The screen is divided into a grid of 30×24. For each of 28×22 areas but the circumference,
enable/disable status and sensitivity of motion detection can be set up.
* When movement is detected in an area wherein Motion Setup in set in ON, the area in which
such movement has been detected is colored in orange.
2.
Setting up motion detection areas
・
Using Keys
1) Using the “3,” “6,” “8,” and “11” keys, move the cursor (pink color) to the intended area for
motion setup and change between Motion Detect ON and OFF with the “7” key. The area set in
ON turns to green color
Motion Detect ON: Green color
Motion Detect OFF: No color
2) By pushing the “UP” and “DOWN” keys, the sensitivity of the selected area is set up.
SENSE LEVEL: 1~5
（
SENSE LEVEL 1 is the setup for highest sensitivity)
3) Pushing the “MENU” ends the setup and returns to the Motion Screen Selection Screen
- 67 -